(as of Mar 04,2021 18:07:13 UTC – Details)
ZEKOO Hardware have devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the best choice
Our instructions step by step with fractional measurements in inch, have detailed word instructions with pictures
1. Mark and drill track and bracket holes
One-piece 6.6ft long sliding track without joints, Pre-drilled 16″ apart holes on track
Keeping the tracks level is VERY IMPORTANT
1 X 6.6FT track
2. Install the inside track use spacers and screws
Our screw is 8.8 grade high strengh bearing capacity, fit for concrete wall and wooden wall
If your door is thicker than 1-3/4″ or have doorway trim, we have 2” spacer can free for you
5 X 1-3/8” spacers
3. Drill hole on door and attach inside door hanger
Door weight capacity is 200lb
The single track bypass hardware is use for double door, door thickness is 1-3/8″ ~ 1-3/4″
2 X straight hangers
4. Drill hole on door and attach outside door hanger
We have different bolts for your different thickness door if you need, we will free for you.
2 X bending hangers
5. Install Door Stoppers with wrench
Stopper can prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety
Rubber covered, good damping effect, reduce the noise
Use 2 screws to fix stopper on track, it is very fastening
You can put it on track where you want to stop your door, easy to remove if you want adjust
2 X stoppers
6. Hang your door and install Anti-jump Pad on top of door
Anti-jump Pad can prevent door to be lifted off rail, ensure the stability and safety
Inside door use the circular anti-jump pads
Outside door use the special production anti-jump pads
4 X anti-jump pads
7. Adjusting your door the opening and closing positions then install floor guide
Floor guide can prevent the door swinging out or up against the baseboard, let your door slide on same locus
Our floor guide have 2 installation methods
If you don’t want to install on floor or slot in your door, we have different kinds of guides can help your project
2 sets X floor guides
8. How to choose size？
Track’s length should be at least of the opening (you can use the track which is a little bit longer). For example, if your opening is 80” wide, you will need at least 92” long track, and please let your two door width than your opening about 10”-12”
The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” ( based on door thickness: 1-9/16” )
Ceiling space from top of the door to ceiling only need 6”
About some questions
Q: Can i cut the track?
A: Yes, you can cut it into any length of you want
Q: How about If the studs don’t line up with the pre-drilled holes in the rail or there is a doorway trim?
A: You can add a headboard
Q: How width from outside door to wall?
A: It is 5”
Q: Do you accept customization?
A: Yes, We are professional factory, accept mass customization
About our product
High purity bearing steel Gcr15 (Special material for bearing), nsure smooth sliding and stand wear and tear
The material is heavy duty high carbon steel, thickness is 1/4”
We have large processing factory and advanced equipment， excellent professional design, production and workmanship
Only the hardware is for sale, door is not included
Single track bypass barn door hardware can help you save space, easy complements your kitchen, wardrobe, bathroom, bedroom, storeroom
【Notice】If you have enough ceiling space for 9”, we suggest you buy double track bypass, the 2 doors are independently slide on track of each other, search ASIN number B076VPWZ92
【Notice】This is single track bypass, one track hang 2 doors, the roller diameter is 2-1/5”, so the door will be have 7”-8” distance overlap, so please let your door bigger than your opening, the 2 rollers will be hit together when one door slide, maybe drive other door slide
【Main Material & Surface】Black frosted（Multiple electrostatic powder spraying process）, high quality carbon steel (High Standard Q235), corrosion protection, antirust，environmental protection, non-pollution.
【Design】Track’s hole: standard 16 inches. Track and roller arm thickness: 1/4 inches, very sturdy. Track and door bolts is 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise.The wheel surface is covered with nylon, slide very quietly.
【Core Parts】Roller Bearing is high purity bearing steel Gcr15, passed the test of opening – closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. Wheel shaft is made of reinforced steel and electrophoretic process, These are different from other products
【Product】We are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install.
【Service】5 years warranty, 100% money back guarantee, 24 hours online customer service, if any part missed or broken, we will ship out from U.S warehouse ASAP. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you.