(as of Mar 04,2021 17:01:12 UTC – Details)
Sopoby 150PCS Solder Seal Heat Shrink Butt Wire Connectors (White)
Inner Diameter: 1.7 mm
Cable cross-section: 0.25-0.34 mm²(A.W.G: 26-24)
Package included: 150PCS
▶Waterproof Seal – Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot melt adhesive & solder inside, sealed with advanced waterproof function.
▶Fast & Easy Operation – Just strip your wires, insert them into the connector and apply heat. Transparent sleeve provides precise inspection, easy control soldering process.
▶No Slip Wire Contact – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, avoids wires slipping out from the terminal.
▶Great wiring solution for hard to reach or limited space areas. Make properly soldered and waterproof connections in less than 30 seconds.
① Strip wire insulation 1/3 inch on both wire ends. Insert into the solder sleeve and twist the wire strands together.
② Continuously rotate the connector when using a heat gun to apply heat evenly around the solder until it flows into the wire strands.
③ Then apply heat to the two ends of the tubing until the adhesive flows and seals the wires.
④ Remove the heat and let it cool down for use.
NOTICE: It is advised to use a heat gun which is 1500-2000W and keep it a distance of 3-5cm to the solder connector when applying heat. The wire connector would easily broken if the heat is too close to it.
Shrinkage ratio: 2:1 Connector working temperature: -55℃ – 125℃ (-67℉ – 257℉)
Minimum shrink temperature: 80℃ (176℉)
Minimum temperature for solder to melt: 138℃ (280.4℉)
Easy To Use: NO Crimping Needed. Transparent sleeve provides precise inspection when strip and insert wires inside. Color-coded tubing makes it easy for you to pick up for use.
High Thickness Solder Ring: The high-density solder ring melts under the hot air gun’s effect, generating more solder to wrap the wires. This enhances electrical conductivity, so the wires will be tightly connected and not easily detached.
Polyolefin Tubing: The shell of the connector is made of quality polyolefin material, resistant to corrosion and chemical attack.
Sufficient Hot Melt Adhesive: The solder connector contains sufficient hot melt adhesive to grasp the wires, featuring weatherproof performance.
Quality Guarantee: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We offer a 30-day money-back guarantee, and a 12-month replacement warranty. 100% Satisfaction Guarantee for risk-free purchases!