(as of Mar 04,2021 17:36:34 UTC – Details)
FirstPower Paint Sprayer, Painting & Refinishing – for Furniture, Kitchen Cabinets, Trim And More!
Voltage: 110V / 60Hz / 700W
Nozzle size: 0.5, 1.0, 1.2, 1.5, 2.5mm
Capacity: 800 ml
Power cord: 2.5m/8.2Ft
3 Spray patterns
Simply rotate the spray tip and select the horizontal, vertical or circular spray pattern, which is a perfect design to choose the fittest one based on your needs.
5 Nozzle Sizes
0.5/1.0/1.2/1.5/2.5mm different sizes can meet different family projects.
0.5mm for watering;
1.0 ,1.2 ,1.5, 2.5mm great for thin paints like sealers, varnish paint,water based paint and solvent based paints.
You can choose different nozzles according to the actual situation.
The paint paint sprayers ergonomic design and lightweight design allow customers to be used comfortably on the hand, reducing fatigue and improving the operability of the project.
Right Container & Viscosity Cup
1. The right size – 800ml container can hold a lot of product, but it won’t be heavy.
2. Viscosity cup measure the viscosity of the paint. Passes through the viscosity cup in 20-30s is ok, 24-28s is best.
3. If it takes longer than 30s for the material to run through the cup, then you will need to thin your paint before use.
Cleaning Brush & Pin
1.A cleaning brush & an needle to unclog any hardened paint left in the machine.
2.All parts of the spray paint sprayer are removable for easy cleaning.
How to exchange the nozzle core?
1. Remove trigger with screwdriver or other.
2. Turn nozzle tip sightly then pull it out.
NOTE: Take the nozzle core out after the trigger is remove.The nozzle tip has spring on the end so take care not to lose it.
3. Choosing the right spray tip and nozzle.
4. Put nozzle core and spring in. Make sure the trigger is locked in correct place.
5. Install the nozzle,air cap and locking nut.
1. Methods to prevent damage to the machine
(1). When the spray gun is standing still, the machine is placed as shown in the first picture. Other placement methods will cause the paint to flow back into the motor and damage the motor.
(2). When the spray gun is spraying upwards, the trigger cannot be released, otherwise the paint will flow back into the motor and cause damage to the machine.
(3). The machine can not spray vertically upwards, when spraying the top, the spray can be inclined 45°.
(4).Do not run for a long time without paint & water,the paint sprayer will died.
2. Suit for water based paint and solvent based paints.
Please add some water or thinner to dilute the paint and stir to ensure that your paint passes through the viscosity cup in 20-30s and meets your requirements, 24-28s is best. (we recommend avoiding oil-based paint as it may corrodes the sprayer!)
3.Precautions before use
Check containers and paint tubes for tighteningl; According to the actual situation.Test the suitable paint thickness or dilute the paint before using and please select the appropriate nozzle size and spray mode.
4. How do I measure paint thickness?
Having the right paint thickness is key to getting an even finish. Before spraying, check that the thickness (viscosity) of your chosen material is suitable for this paint sprayer. Run your material through the included flow cup and time in seconds how long it takes for the cup to empty. If it takes longer than 30s, you will need to dilute – add water or thinner and repeat the test until you have a nice even material consistency.
5. How to prevent the nozzles from clogging ?
Use the right paint thickness or dilute the paint before using. and wash it immediately after painting. It comes with a cleaning brushes and a clogging needle to unclog any hardened paint left in the machine. then fill the container with clean water and spray it for 60s to remove paint from the valve core. If the nozzle is blocked, it will cause – no spray or uneven spray.
6. How to clean ?
Use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). Always check the back of the paint container for appropriate cleaning solution. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC), reference the paint can. Flash point is the temperature at which a fluid can produce enough vapor to ignite.
7. It is important that you read the instructions carefully before using the product.
🔫【FOR BEGINNERS】: With 700 Watts of power, providing more accurate & evenly spraying and faster work efficiency. Perfect for painting and staining a smooth finish on car parts, home appliance parts, tables, chairs, fences, interior walls, crafts and more.
🔫【ONLY SUIT FOR THIN PAINTS】: Such as water based paint & solvent based paints. Passes through the viscosity cup in 20-30s is ok, 24-28s is best. You can also dilute according to the actual situation to obtain the best viscosity. Best spray distance: 30cm. The spray gun won’t spray granular solid liquids such as diatom mud, diamond paint, imitation stone paint, real stone paint, putty powder, powder paint, etc. Latex paint is not recommended.
🔫【3 SPRAY PATTERNS & 5 NOZZLES SIZE】: 3 different spray patterns – (vertical/ horizontal/ circular); Spray paint sprayer features 5 nozzle sizes (0.5/1.0/1.2 /1.5/2.5mm). 0.5mm for watering. 1.0 ,1.2 ,1.5, 2.5mm great for thin paints like sealers and varnish paint,water based paint and solvent based paints. You can choose different nozzles according to the actual situation. Great for wooden furniture -tables, chairs, cabinets,fences or crafts.
🔫【LIGHTWEIGHT& CONVENIENCE】: It is lightweight in the user’s hand to let you spraying longer without fatigue.The 8.2ft power cord is long enough for you to move freely in large work area. A cleaning brush & an needle to unclog any hardened paint left in the machine.
🔫【WHAT YOU WILL GET】: Electric Spray Paint Sprayer, 800ml Container, Viscosity cup, Cleaning Brush, Cleaning Needle, 5 Nozzles- 0.5/1.0/1.2/ 1.5/2.5mm (2.5mm installed), User Manual. TIPS: To prevent paint dries at the nozzle, clogging the sprayer, spray paint sprayer should be cleaned timely after spraying, then fill the container with clean water and spray it for 60s to remove paint from the valve core. If you have any questions, please feel free to contact us.